BMC Poland

Sin-beam application as main construction carrier allows to reduce metal capacity and construction costs. Compared to welded construction those costs are 10 -15 % lower.

BMC Poland is an official representative of the Ukrainian metal constructions factory – SSM Group

Go to SSM Group

Design

A project is an important part of your design. Only qualified and consistent approach to design documents allows you to reduce risks and costs of the project and secure stability of your construction.

All projects are worked upon with the use of actual European and local design standards

Two services(drawings) on the projecting of MC(Metal Constructions) and MDC (Metal Detailed Constructions)have been unleashed.

MC Drawings

MC Drawings contain general plans and schemes of important chains or sections.

Section choice;
Calculation of construction elements;
Interface nodes workout;
Possibilities of using our construction in sanitary, technological and energy part of the whole project.

Besides MC projecting entails metal specification on separate construction elements.MC drawing is a base for MDC and is used for exact manufacturing and correct placing of the constructions.

Drawings produced by our company define following guarantees:

Correspondence of the detailed drawing to the MC drawing;
Definition of estimated strength of the construction elements and the places of their link;
Material saving;
Good looks of details and frames.

MDS drawings

MDC drawings are basic documents on which the production of construction is based.

A well written drawing allows to follow production and assembly work avoiding mistakes:

Production of particular details making up a construction without the necessity of additional calculations and sketches;
Exact details compilation into a construction;
Exact assembly of joineries.

Many production indications depend on how professional and accurate the drawing is:

Product quality;
Cost price;
Productivity;
Labour input of metallic constructions.

Working out drawings during the process of design helps to increase the operation quality of construction elements saving metal and to conduct assembling activities much faster.

If you have any questions, leave a request and we will contact you

Metal Constructions

Building metal constructions are manufactured within one factory on automatic or semiautomatic lines produced in Germany, Austria, USA, Czech Republic, Holland and Italy(such works as Peddinghaus, Gietart, Pierce, GEKA, MEBA, OTECO, LEMMER, ZEMAN, FRONIUS and others)

Before painting all metallic constructions must undergo shot blasting to a special class. Such blastings are made on machines Gietart(USA) and OTECO(Czech Republic).Danish machines of SIGMA are used for painting.

The production of metallic constructions and the delivered products are fully certified and have European quality certificates EN ISO 3834-2 ,EN 1090-2:2018

Types of metallic constructions

Corrugated(SIN) beam

Welded I-Joists

Trusses

Much attention should be paid to metal constructions for house building called Sin-beams.

A Sin-beam is a lighter corrugated I-beam ,whose I-joists are welded into corrugated steel wall.

The production of SIN-beams is based on the robotic automatic line produced by “ZEMAN BAUELEMENTE Produktionsgesellshaft mbH Austria.

The corrugated sheet is connected to the surface with a single one-side firm welded seam. The welding mode matches the scanning device by the length of the weld ,taking into account the shearing defects and commanding the welding heads of the robots produced by Swedish „ABB”

Dimensions

Corrugated beam:	Height: 333, 500, 625, 750, 1 000, 1 250, 1 500 мм Thickness: 2.0; 2.5; 3.0 мм
Slits:	Min. width – 120 мм Max. width – 430 мм Min. thickness– 4 мм Max. thickness– 30 мм
Length of the corrugated beams welded on the line :	max – 12 000 мм

Advantages of corrugated beams

Productivity

A corrugated beam is extremely productive when used in big spans, its length always corresponds to the data of an individual order with span lengths up to 80 m. Corrugated beams can be used as spans, one or multi-span frames, bridge structures and columns.

Steel frame weight reduction to 15 %

A profiled sheet of the beam wall maintains big hardness and sustainability to deformation compared to an ordinary I-beam wall, which helps to do without additional structural stiffeners and ties and reduce metal weight of constructions.

High load bearing capacity

Corrugated beams have a maximum bearing capacity taking into account their optimal weight. They combine the advantages of lattice frames(big spans with small weights) and ordinary rolled beams (a small construction height and high bearing capacity)